User's Manual Part 1

Configuring Network Settings
Chapter 5: Managing Your Network 103
networks. You can easily customize this behavior by creating firewall user
rules. For further information, see Using Rules on page 154.
mple, you c
twork and
accounting departm able to connect to all company computers,
while the rest of the e p ensitive
information on the acc then create
firewall rules that allow r’s
computer) to connect t artment.
For exa
LAN ne
ould assign your company’s accounting department to the
the rest of the company to the DMZ network. The
ent would be
m loyees would not be able to access any s
ounting department computers. You could
specific DMZ computers (such a manage
to he LAN network and the accounting dep
Note: If you are u 5, you can enable the DHCP server
for the DM
If you are ot
obtain IP c
IP addres
30.
sing Safe@Office 22
Z network.
using Safe@Office 110, computers in the DMZ network cann
addresses using DHCP, and therefore must be assigned stati
s. For instructions, see TCP/IP Settings on page 34, on page
Note: The default gateway for the DMZ computers should be specified as
the Safe@Office DMZ IP address.
To configure a DMZ network
1. Connect the DMZ computer(s) as follows:
• If you are using Safe@Office 110, connect the DMZ computers to
any of the appliance's LAN ports.
• If you are using Safe@Office 225, connect the DMZ computer to
the DMZ port.
If you have more than one computer in the DMZ network, connect a
hub or switch to the DMZ port, and connect the DMZ computers to
the hub.
2. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
3. In the DMZ network's row, click Edit.