User's Manual Part 3

Using RADIUS Authentication
Chapter 13: Managing Users 375
In this field… Do this…
Realm If your organization uses RADIUS realms, type the realm to append to
RADIUS requests. The realm will be appended to the username as
follows: <username>@<realm>
For example, if you set the realm to “myrealm”, and the user "JohnS"
attempts to log on to the Safe@Office Portal, the Safe@Office
appliance will send the RADIUS server an authentication request with
the username “JohnS@myrealm”.
This field is optional.
Timeout Type the interval of time in seconds between attempts to communicate
with the RADIUS server.
The default value is 3 seconds.
RADIUS User
Permissions
If the RADIUS VSA (Vendor-Specific Attribute) is configured for a user,
the fields in this area will have no effect, and the user will be granted
the permissions specified in the VSA.
If the VSA is not configured for the user, the permissions configured in
this area will be used.
Administrator Level Select the level of access to the Safe@Office Portal to assign to all
users authenticated by the RADIUS server.
The levels are:
• No Access: The user cannot access the Safe@Office Portal
• Read/Write: The user can log on to the Safe@Office Portal
and modify system settings.
• Read Only: The user can log on to the Safe@Office Portal,
but cannot modify system settings.
The default level is No Access.