User's Manual Part 3

Configuring Computers to Use Network Printers
Chapter 15: Using Network Printers 429
The port number appears in the Printer Server TCP Port field. You will need this
number later, when configuring computers to use the network printer.
6. To change the port number, do the following:
a. Type the desired port number in the Printer Server TCP Port field.
Note: Printer port numbers may not overlap, and must be high ports.
b. Click Apply.
You may want to change the port number if, for example, the printer you are
setting up is intended to replace another printer. In this case, you should change
the replacement printer's port number to the old printer's port number, and you
can skip the next step.
7. Configure each computer from which you want to enable printing to the network
printer.
See Configuring Computers to Use Network Printers on page 429.
Configuring Computers to Use Network Printers
Perform the relevant procedure on each computer from which you want to enable
printing via the Safe@Office print server to a network printer.
Windows 2000/XP
This procedure is relevant for computers with a Windows 2000/XP operating
system.
To configure a computer to use a network printer
1. If the computer for which you want to enable printing is located on the WAN,
create an Allow rule for connections from the computer to This Gateway.
See Adding and Editing Rules on page 215.