User's Manual Part 3

Setting Up Network Printers
428 Check Point Safe@Office User Guide
Setting Up Network Printers
To set up a network printer
1. Connect the network printer to the Safe@Office appliance.
See Network Installation on page 37.
2. Turn the printer on.
3. In the Safe@Office Portal, click Setup in the main menu, and click the Printers
tab.
The Printers page appears. If the Safe@Office appliance detected the printer, the
printer is listed on the page.
4. If the printer is not listed, check that you connected the printer correctly, then
click Refresh to refresh the page.
5. Write down the port number allocated to the printer.