User's Manual Part 3

Resetting the Safe@Office Appliance to Defaults
422 Check Point Safe@Office User Guide
Resetting the Safe@Office Appliance to Defaults
You can reset the Safe@Office appliance to its default settings. When you reset
your Safe@Office appliance, it reverts to the state it was originally in when you
purchased it. You can choose to keep the current firmware or to revert to the
firmware version that shipped with the Safe@Office appliance.
Warning: This operation erases all your settings and password information. You will
have to set a new password and reconfigure your Safe@Office appliance for Internet
connection. For information on performing these tasks, see Setting Up the
Safe@Office Appliance.
You can reset the Safe@Office appliance to defaults via the Web management
interface (software) or by manually pressing the Reset button (hardware) located at
the back of the Safe@Office appliance.
To reset the Safe@Office appliance to factory defaults via the Web interface
1. Click Setup in the main menu, and click the Tools tab.
The Tools page appears.
2. Click Factory Settings.