User's Manual Part 3

Setting the Time on the Appliance
Chapter 14: Maintenance 401
In this field... Do this…
SNMP Port Type the port to use for SNMP.
The default port is 161.
Setting the Time on the Appliance
You set the time displayed in the Safe@Office Portal during initial appliance setup.
If desired, you can change the date and time using the procedure below.
To set the time
1. Click Setup in the main menu, and click the Tools tab.
The Tools page appears.
2. Click Set Time.
The Safe@Office Set Time Wizard opens displaying the Set the Safe@Office Time
dialog box.