User's Manual Part 3

Configuring SSH
Chapter 14: Maintenance 397
See Access Options on page 395 for information.
Warning: If remote SSH is enabled, your Safe@Office appliance settings can be
changed remotely, so it is especially important to make sure all Safe@Office
appliance users’ passwords are difficult to guess.
If you selected IP Address Range, additional fields appear.
3. If you selected IP Address Range, enter the desired IP address range in the fields
provided.
4. Click Apply.
The SSH configuration is saved. If you configured remote SSH access, you can
now control the Safe@Office appliance from the Internet, using an SSHv2
client.
For information on all supported commands, refer to the Embedded NGX CLI
Reference Guide.