User's Manual Part 3

Configuring SSH
396 Check Point Safe@Office User Guide
Select this
option…
To allow access from…
Internal Network and
VPN
The internal network and your VPN.
IP Address Range A particular range of IP addresses.
Additional fields appear, in which you can enter the desired IP address
range.
ANY Any IP address.
Disabled Nowhere.
This completely disables access. This option is only available for
SNMP.
Configuring SSH
Safe@Office appliance users can control the appliance via the command line, using
the SSH (Secure Shell) management protocol. You can enable users to do so via
the Internet, by configuring remote SSH access. You can also integrate the
Safe@Office appliance with SSH-based management systems.
Note: The Safe@Office appliance supports SSHv2 clients only. The SSHv1 protocol
contains security vulnerabilities and is not supported.
To configure SSH
1. Click Setup in the main menu, and click the Management tab.
The Management page appears.
2. Specify from where SSH access should be granted.