User's Manual Part 3

Controlling the Appliance via the Command Line
390 Check Point Safe@Office User Guide
Controlling the Appliance via the Command Line
Depending on your Safe@Office model, you can control your appliance via the
command line in the following ways:
• Using the Safe@Office Portal's command line interface.
See Using the Safe@Office Portal on page 390.
• Using a console connected to the Safe@Office appliance.
For information, see Using the Serial Console on page 392.
• Using an SSH client.
See Configuring SSH on page 396.
Using the Safe@Office Portal
You can control your appliance via the Safe@Office Portal's command line
interface.
To control the appliance via the Safe@Office Portal
1. Click Setup in the main menu, and click the Tools tab.