User's Manual Part 3

Configuring Syslog Logging
Chapter 14: Maintenance 389
The Logging page appears.
2. Complete the fields using the information in the table below.
3. Click Apply.
Table 79: Logging Page Fields
In this field… Do this…
Syslog Server Type the IP address of the computer that will run the Syslog service
(one of your network computers), or click This Computer to allow your
computer to host the service.
Clear
Click to clear the Syslog Server field.
Syslog Port Type the port number of the Syslog server.
Default
Click to reset the Syslog Port field to the default (port 514 UDP).