User's Manual Part 2

Using Rules
220 Check Point Safe@Office User Guide
In this field… Do this…
Redirect to port Select this option to redirect the connections to a specific port.
You must then type the desired port in the field provided.
This option is called Port Address Translation (PAT), and is only available
when defining an Allow and Forward rule.
Enabling/Disabling Rules
You can temporarily disable a user-defined rule.
To enable/disable a rule
1. Click Security in the main menu, and click the Rules tab.
The Rules page appears.
2. Next to the desired rule, do one of the following:
• To enable the rule, click .
The button changes to and the rule is enabled.
• To disable the rule, click .
The button changes to and the rule is disabled.