User's Manual Part 2

Preparing the Wireless Stations
184 Check Point Safe@Office User Guide
Preparing the Wireless Stations
After you have configured a WLAN, the wireless stations must be prepared for
connection to the WLAN.
To prepare the wireless stations
1. If you selected the WEP security mode, give the WEP key to the wireless
stations' administrators.
2. If you selected the WPA-PSK security mode, give the passphrase to the wireless
stations' administrator.
3. The wireless stations' administrators should configure the wireless stations and
connect them to the WLAN.
Refer to the wireless cards' documentation for details.
Note: Some wireless cards have "Infrastructure" and "Ad-hoc" modes. These modes
are also called "Access Point" and "Peer to Peer". Choose the "Infrastructure" or
"Access Point" mode.
You can set the wireless cards to either "Long Preamble" or "Short Preamble".
Note: The wireless cards' region and the Safe@Office appliance's region must both
match the region of the world where you are located. If you purchased your
Safe@Office appliance in a different region, contact technical support.