User's Manual Part 2

Using the Wireless Configuration Wizard
180 Check Point Safe@Office User Guide
• Click No Security to use no security to create a public, unsecured access
point.
Note: You cannot configure WPA and 802.1x using this wizard. For information on
configuring these modes, see Manually Configuring a WLAN on page 167.
10. Click Next.
WPA-PSK
If you chose WPA-PSK, the Wireless Configuration-WPA-PSK dialog box appears.
Do the following:
1. In the text box, type the passphrase for accessing the network, or click Random
to randomly generate a passphrase.
This must be between 8 and 63 characters. It can contain spaces and special
characters, and is case-sensitive.
2. Click Next.