User's Manual Part 2

Managing Ports
152 Check Point Safe@Office User Guide
Resetting Ports to Defaults
You can reset the Safe@Office appliance's ports to their default link configurations
("Automatic Detection") and default assignments (shown in the table below).
Table 20: Default Port Assignments
Port Default Assignment
1-4 LAN
DMZ / WAN2 DMZ
WAN This port is always assigned to the WAN.
RS232 Modem
To reset ports to defaults
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Click Default.
A confirmation message appears.
3. Click OK.
The ports are reset to their default assignments and to "Automatic Detection"
link configuration.
All currently-established connections that are not supported by the default
settings may be broken. For example, if you were using the DMZ/WAN2 port as
WAN2, the port reverts to its DMZ assignment, and the secondary Internet
connection moves to the WAN port.