User's Manual Part 2

Using SmartDefense
250 Check Point Safe@Office User Guide
Table 51: Block Port Overflow
In this field… Do this…
Action Specify what action to take for PORT commands containing a number
greater than 255, by selecting one of the following:
• Block. Block the PORT command. This is the default.
• None. No action.
Blocked FTP Commands
Some seldom-used FTP commands may compromise FTP server security and
integrity. You can specify which FTP commands should be allowed to pass through
the security server, and which should be blocked.
To enable FTP command blocking
• In the Action drop-down list, select Block.
The FTP commands listed in the Blocked commands box will be blocked.
FTP command blocking is enabled by default.