User's Manual Part 2

Using SmartDefense
Chapter 9: Setting Your Security Policy 239
You can configure how Cisco IOS DOS attacks should be handled.
Table 44: Cisco IOS DOS
In this field… Do this…
Action Specify what action to take when a Cisco IOS DOS attack occurs,
by selecting one of the following:
• Block. Block the attack. This is the default.
• None. No action.
Track Specify whether to log Cisco IOS DOS attacks, by selecting one of
the following:
• Log. Log the attack. This is the default.
• None. Do not log the attack.
Number of Hops to Protect Type the number of hops from the enforcement module that Cisco
routers should be protected.
The default value is 10.