User's Manual Part 2

Using SmartDefense
238 Check Point Safe@Office User Guide
Table 43: Welchia Fields
In this field… Do this…
Action Specify what action to take when the Welchia worm is detected, by selecting
one of the following:
• Block. Block the attack. This is the default.
• None. No action.
Track Specify whether to log Welchia worm attacks, by selecting one of the
following:
• Log. Log the attack. This is the default.
• None. Do not log the attack.
Cisco IOS DOS
Cisco routers are configured to process and accept Internet Protocol version 4
(IPv4) packets by default. When a Cisco IOS device is sent a specially crafted
sequence of IPv4 packets (with protocol type 53 - SWIPE, 55 - IP Mobility, 77 -
Sun ND, or 103 - Protocol Independent Multicast - PIM), the router will stop
processing inbound traffic on that interface.