User's Manual Part 1

Using the Internet Wizard
56 Check Point Safe@Office User Guide
• Enable Traffic Shaper for traffic flowing through the connection.
For information on Traffic Shaper, see Using Traffic Shaper on page 153.
• Configure a dialup Internet connection.
Before configuring the connection, you must first set up the modem. For
information, see Setting Up a Dialup Modem on page 86.
Using the Internet Wizard
The Internet Wizard allows you to configure your Safe@Office appliance for
Internet connection quickly and easily through its user-friendly interface. It lets you
to choose between the following three types of broadband connection methods:
• Direct LAN Connection
• Cable Modem
• PPTP or PPPoE dialer
Note: The first time you log on to the Safe@Office Portal, the Internet Wizard starts
automatically as part of the Setup Wizard. In this case, you should skip to step 3 in
the procedure below.
To set up the Internet connection using the Internet Wizard
1. Click Network in the main menu, and click the Internet tab.
The Internet page appears.
2. Click Internet Wizard.