User's Manual Part 1

Securing the Appliance against Theft
Chapter 2: Installing and Setting up the Safe@Office Appliance 35
While these parts may differ between devices, all looped security cables include a
bolt with knobs, as shown in the diagram below:
Figure 7: Looped Security Cable Bolt
The bolt has two states, Open and Closed, and is used to connect the looped
security cable to the appliance's security slot.
To install an anti-theft device on the Safe@Office appliance
1. If your anti-theft device has a combination lock, set the desired code, as
described in the documentation that came with your device.
2. Connect the anti-theft device's loop to any sturdy mounting point, as described
in the documentation that came with your device.
3. Slide the anti-theft device's bolt to the Open position.