User's Manual Part 1

Before You Install the Safe@Office Appliance
Chapter 2: Installing and Setting up the Safe@Office Appliance 17
Chapter 2
This chapter describes how to properly set up and install your Safe@Office
appliance in your networking environment.
This chapter includes the following topics:
Before You Install the Safe@Office Appliance .........................................17
Wall Mounting the Appliance ....................................................................32
Securing the Appliance against Theft.........................................................34
Network Installation...................................................................................37
Setting Up the Safe@Office Appliance......................................................38
Before You Install the Safe@Office Appliance
Prior to connecting and setting up your Safe@Office appliance for operation, you
must do the following:
• Check if TCP/IP Protocol is installed on your computer.
• Check your computer’s TCP/IP settings to make sure it obtains its IP
address automatically.
Refer to the relevant section in this guide in accordance with the operating system
that runs on your computer. The sections below will guide you through the TCP/IP
setup and installation process.
Installing and Setting up the Safe@Office
Appliance