User's Manual Part 1

Configuring High Availability
126 Check Point Safe@Office User Guide
Note: The synchronization interface must be the same for all gateways, and must
always be connected and enabled on all gateways. Otherwise, multiple appliances
may become active, causing unpredictable problems.
7. Complete the fields using the information the table below.
8. Click Apply.
A success message appears.
9. If desired, configure WAN HA for both the primary and secondary Internet
connection.
This setting should be the same for all gateways. For further information, see
Using Internet Setup on page 65.
Table 14: High Availability Page Fields
In this field… Do this…
Priority
My Priority Type the gateway's priority.
This must be an integer between 1 and 255.
Interface Tracking
Internet - Primary Type the amount to reduce the gateway's priority if the primary Internet
connection goes down.
This must be an integer between 0 and 255.