User's Manual Part 1

Configuring Network Settings
Chapter 5: Managing Your Network 117
5. In the IP Address field, type the IP address of the VLAN network's default
gateway.
Note: The VLAN network must not overlap other networks.
6. In the Subnet Mask field, type the VLAN's internal network range.
7. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 109.
8. If desired, configure a DHCP server.
See Configuring a DHCP Server on page 96.
9. Click Apply.
A warning message appears.
10. Click OK.
A success message appears.
11. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
12. In the drop-down list next to the LAN port you want to assign, select the
VLAN network's name.
You can assign more than one port to the VLAN.
13. Click Apply.