User's Manual Part 1

Configuring Network Settings
Chapter 5: Managing Your Network 107
In this field… Do this…
TFTP Server Trivial File Transfer Protocol (TFTP) enables booting diskless
computers over the network.
To assign a TFTP server to the DHCP clients, type the IP address of
the TFTP server.
TFTP Boot File Type the boot file to use for booting DHCP clients via TFTP.
Changing IP Addresses
If desired, you can change your Safe@Office appliance’s internal IP address, or the
entire range of IP addresses in your internal network. You may want to perform
these tasks if, for example, you are adding the Safe@Office appliance to a large
existing network and don't want to change that network’s IP address range, or if
you are using a DHCP server other than the Safe@Office appliance, that assigns
addresses within a different range.
To change IP addresses
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the LAN network's row, click Edit.
The Edit Network Settings page appears.
3. To change the Safe@Office appliance’s internal IP address, enter the new IP
address in the IP Address field.
4. To change the internal network range, enter a new value in the Subnet Mask
field.