User's Manual Part 1

Configuring Network Settings
102 Check Point Safe@Office User Guide
The Automatic DHCP range check box is disabled, and the Relay to IP field
appears.
4. In the Relay to IP field, type the IP address of the desired DHCP server.
5. Click Apply.
A warning message appears.
6. Click OK.
A success message appears
7. If your computer is configured to obtain its IP address automatically (using
DHCP), and either the Safe@Office DHCP server or another DHCP server is
enabled, restart your computer.
Your computer obtains an IP address in the DHCP address range.