User's Manual Part 1

Configuring Network Settings
100 Check Point Safe@Office User Guide
The DHCP IP range fields appear.
b. In the DHCP IP range fields, type the desired DHCP range.
4. To allow the DHCP server to set the IP address range, select the Automatic
DHCP range check box.
5. Click Apply.
A warning message appears.
6. Click OK.
A success message appears
7. If your computer is configured to obtain its IP address automatically (using
DHCP), and either the Safe@Office DHCP server or another DHCP server is
enabled, restart your computer.
Your computer obtains an IP address in the new DHCP address range.