User's Manual Part 1

Configuring Network Settings
Chapter 5: Managing Your Network 99
Configuring the DHCP Address Range
By default, the Safe@Office DHCP server automatically sets the DHCP address
range. The DHCP address range is the range of IP addresses that the DHCP server
can assign to network devices. IP addresses outside of the DHCP address range are
reserved for statically addressed computers.
If desired, you can set the Safe@Office DHCP range manually.
Note: Setting the DHCP range manually is not available for the OfficeMode network.
To configure the DHCP address range
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
The Edit Network Settings page appears.
3. To set the DHCP range manually:
a. Clear the Automatic DHCP range check box.