User's Manual Part 1

Setting Up a Dialup Modem
86 Check Point Safe@Office User Guide
In this field… Do this…
1, 2, 3
If you chose the Ping Addresses connection probing method, type the IP
addresses or DNS names of the desired servers.
If you chose the Probe VPN Gateway (RDP) connection probing method, type
the IP addresses or DNS names of the desired VPN gateways.
You can clear a field by clicking Clear.
Setting Up a Dialup Modem
You can use a dialup modem as a primary or secondary Internet connection
method. This is useful in locations where broadband Internet access is unavailable.
When used as a backup Internet connection, the modem can be automatically
disconnected when not in use. For information on setting up a dialup backup
connection, see Setting Up a Dialup Backup Connection on page 94.
To set up a dialup modem
1. Connect a regular or ISDN dialup modem to your Safe@Office appliance's
serial port.
For information on locating the serial port, see Rear Panel.
2. Click Network in the main menu, and click the Ports tab.