User's Manual

Configuring High Availability
Chapter 5: Managing Your Network 89
To configure High Availability
1. In the Master Safe@Office appliance, do the following:
a. Set the appliance’s internal IP address.
For further information, see Changing IP Addresses on page 82.
b. Configure the LAN network range.
For further information, see Changing IP Addresses on page 82.
c. Click Network in the main menu, and click the High
Availability tab.
The High Availability page appears.
d. In the LAN area, in the High Availability Mode drop-down list,
select Master.
e. In the Virtual Router IP text box, type the default gateway IP
address.
This can be any unused IP address in the LAN network, and must be
the same for both gateways.
f. Click Apply.
A success message appears.