User's Manual

Configuring Network Settings
Chapter 5: Managing Your Network 81
When using Safe@Office 110 and 225, the My Network page appears as
follows:
2. In the DHCP Server list, select Enabled or Disabled.
3. Click Apply.
A warning message appears.
4. Click OK.
 If you chose to disable the DHCP server, the DHCP server is
disabled.
 If you chose to enable the DHCP server, it is enabled.
 A success message appears
5. Do one of the following:
 If your computer is configured to obtain its IP address
automatically
(using DHCP), and the Safe@Office DHCP server is enabled,
restart your computer.
 Otherwise, manually reconfigure your computer to use the new
address range using the TCP/IP settings. For information on
configuring TCP/IP, see TCP/IP Settings on page 28, on page 24.