User's Manual

Network Installation
Chapter 2: Installing and Setting up the Safe@Office Appliance 31
Mac OS
Use the following procedure for setting up the TCP/IP Protocol.
1. Choose Apple Menus -> Control Panels -> TCP/IP.
The TCP/IP window appears.
2. Click the Connect via drop-down list and select Ethernet.
3. Click the Configure drop-down list and select Using DHCP Server.
4. Close the window and save the setup.
Network Installation
1. Verify that you have the correct cable type.
For information, see Network Requirements on page 9.
2. Connect the LAN cable:
 Connect one end of the Ethernet cable to one of the LAN ports at
the back of the unit.
 Connect the other end to PCs, hubs, or other network devices.
3. Connect the WAN cable: