User's Manual

Before You Install the Safe@Office Appliance
Chapter 2: Installing and Setting up the Safe@Office Appliance 19
Chapter 2
Installing and Setting up the
Safe@Office Appliance
This chapter describes how to properly set up and install your Safe@Office
appliance in your networking environment.
This chapter includes the following topics:
Before You Install the Safe@Office Appliance ...................................19
Network Installation.............................................................................31
Setting Up the Safe@Office Appliance................................................32
Before You Install the Safe@Office
Appliance
Prior to connecting and setting up your Safe@Office appliance for operation,
you must do the following:
• Check if TCP/IP Protocol is installed on your computer.
• Check your computer’s TCP/IP settings to make sure it obtains its
IP address automatically.
Refer to the relevant section in this guide in accordance with the operating
system that runs on your computer. The following sections will guide you
through the TCP/IP setup and installation process.