User's Manual

Configuring Syslog Logging
Chapter 11: Maintenance 205
To configure Syslog logging
1. Click Setup in the main menu, and click the Logging tab.
The Logging page appears.
2. Complete the fields using the information in the table below.
3. Click Apply.
Table 28: Logging Page Fields
In this field… Do this…
Syslog Server Type the IP address of the computer that will run
the Syslog service (one of your network
computers), or click This Computer to allow your
computer to host the service.
Clear
Click to clear the Syslog Server field.
Syslog Port Type the port number of the Syslog server.