User's Manual

Getting to Know Your Safe@Office 100 Series
Chapter 1: Introduction 11
Table 1: Safe@Office Appliance 100 Rear Panel Elements
Label Description
PWR A power jack used for supplying power to the unit. Connect the
supplied power adapter to this jack.
RESET A button used for rebooting the Safe@Office appliance or
resetting the Safe@Office appliance to its factory defaults. You
need to use a pointed object to press this button.
• Short press. Reboots the Safe@Office appliance
• Long press (7 seconds). Resets the Safe@Office
appliance to its factory defaults, and resets your
firmware to the version that shipped with the
Safe@Office appliance. This results in the loss of all
security services and passwords and reverting to the
factory default firmware. You will have to re-configure
your Safe@Office appliance.
Do not reset the unit without consulting your system
administrator.
WAN Wide Area Network: An Ethernet port (RJ-45) used for
connecting your cable or xDSL modem
LAN 1-4 Local Area Network switch: Four Ethernet ports (RJ-45) used
for connecting computers or other network devices