User's Manual

Logging on to a VPN Site
168 Check Point Safe@Office User Guide
Logging on to a VPN Site
You need to manually log on to Remote Access VPN sites configured for
Manual Login. You do not need to manually log on to a Remote Access VPN
site configured for Automatic Login or a Site-to-Site VPN gateway: all the
computers on your network have constant access to it.
Manual Login can be done through either the Safe@Office Portal or the
my.vpn page. When you log on and traffic is sent to the VPN site, a VPN
tunnel is established. Only the computer from which you logged on can use
the tunnel. To share the tunnel with other computers in your home network,
you must log on to the VPN site from those computers, using the same user
name and password.
Note: You must use a single user name and password for each VPN
destination gateway.
Logging on through the Safe@Office Portal
Note: You can only login to sites that are configured for Manual Login.
To manually log on to a VPN site through the Safe@Office Portal
1. Click VPN in the main menu, and click the VPN Login tab.