User's Manual

Adding and Editing VPN Sites
156 Check Point Safe@Office User Guide
In this field… Do this…
Subnet mask Select the subnet masks for the destination network
addresses.
Note: Obtain the destination networks and subnet
masks from the VPN gateway’s system
administrator.
Backup Gateway Type the name of the VPN gateway to use if the
primary VPN gateway fails.
Configuring a Site-to-Site VPN Gateway
If you selected Site to Site VPN, the VPN Gateway Address dialog box appears.
1. In the VPN Gateway field, enter the IP address of the VPN gateway to which
you want to connect, as given to you by the network administrator.