User's Manual

Viewing Computers
104 Check Point Safe@Office User Guide
Viewing Computers
This option allows you to view the currently active computers on your
network. The active computers are graphically displayed, each with its name,
IP address, and settings (DHCP, Static, etc.).
You can also view node limit information.
To view the active computers
1. Click Reports in the main menu, and click the Active Computers tab.
The Active Computers page appears.
If you configured High Availability, both the master and backup
appliances are shown.
If you are exceeding the maximum number of concurrent computers
allowed by your license, a warning message appears, and the computers
over the node limit are marked in red. These computers are still protected,
but they are blocked from accessing the Internet through the Safe@Office
appliance.