User's Manual

Configuring High Availability
90 Check Point Safe@Office User Guide
2. In the Backup appliance, do the following:
a. Set the appliance’s internal IP address.
For further information, see Changing IP Addresses on page 82.
The internal IP address must differ from the Master appliance’s
internal IP address.
b. Configure the LAN network range to the same range you
configured in the Master appliance.
For further information, see Changing IP Addresses on page 82.
c. Click Network in the main menu, and click the High
Availability tab.
The High Availability page appears.
d. In the LAN area, in the High Availability Mode drop-down list,
select Backup.
e. In the Virtual Router IP text box, type the default gateway IP
address.
This address must be identical to the Virtual Router IP address you
specified when configuring the Master gateway.
f. Click Apply.
A success message appears.