User Manual Part 2
Table Of Contents
- Using SmartDefense
- Using Antivirus and Antispam Filtering
- Overview
- Using VStream Antivirus
- Using VStream Antispam
- How VStream Antispam Works
- Header Marking
- Default Antispam Policy
- Enabling/Disabling VStream Antispam
- Viewing VStream Antispam Statistics
- Configuring the Content Based Antispam Engine
- Configuring the Block List Engine
- Configuring the IP Reputation Engine
- Configuring the VStream Antispam Policy
- Configuring the Safe Sender List
- Configuring VStream Antispam Advanced Settings
- Using Centralized Email Filtering
- Using Web Content Filtering
- Updating the Firmware
- Using Subscription Services
- Working With VPNs
- Overview
- Setting Up Your Safe@Office Appliance as a VPN Server
- Adding and Editing VPN Sites
- Viewing and Deleting VPN Sites
- Enabling/Disabling a VPN Site
- Logging in to a Remote Access VPN Site
- Logging Out of a Remote Access VPN Site
- Using Certificates
- Viewing VPN Tunnels
- Viewing IKE Traces for VPN Connections
- Viewing VPN Topology
- Managing Users
- Using Remote Desktop
- Controlling the Appliance via the Command Line
- Maintenance
- Viewing Firmware Status
- Upgrading Your Software Product
- Configuring a Gateway Hostname
- Configuring Syslog Logging
- Configuring HTTPS
- Configuring SNMP
- Setting the Time on the Appliance
- Using Diagnostic Tools
- Backing Up and Restoring the Safe@Office Appliance Configuration
- Using Rapid Deployment
- Resetting the Safe@Office Appliance to Defaults
- Running Diagnostics
- Rebooting the Safe@Office Appliance
- Using Network Printers
- Troubleshooting
- Specifications
- Glossary of Terms
- Index
Connectivity
Chapter 25: Troubleshooting 757
Chapter 25
This chapter provides solutions to common problems you may encounter while using the
Safe@Office appliance.
Note: For information on troubleshooting wireless connectivity, see
Troubleshooting Wireless Connectivity on page 302.
This chapter includes the following topics:
Connectivity ............................................................................................ 757
Service Center and Upgrades................................................................... 76
1
Other Problems........................................................................................ 762
Connectivity
I cannot access the Internet. What should I do?
• Verify that the Safe@Office appliance is operating. If not, check the power
connection to the Safe@Office appliance.
• Check if the LED for the WAN port is green. If not, check the network cable to
the modem and make sure the modem is turned on.
• Check if the LED for the LAN port used by your computer is green. If not,
check if the network cable linking your computer to the Safe@Office appliance
is connected properly. Try replacing the cable or connecting it to a different
LAN port.
• Using your Web browser, go to http://my.firewall and see whether "Connected"
appears on the Status Bar. Make sure that your Safe@Office appliance network
settings are configured as per your ISP directions.
• Check your TCP/IP configuration according to Installing and Setting up the
Safe@Office Appliance on page 45.
• If Web Filtering or Em
ail Filtering are on, tr
y turning them off.
Troubleshooting