User Manual Part 2

Configuring RADIUS Attributes
Chapter 20: Managing Users 657
Configuring RADIUS Attributes
To define a timeout for Secure HotSpot sessions
• Set the Session-Timeout Attribute (attribute 27) to the number of seconds after
which users should be automatically logged out from the hotspot.
To assign permissions to specific RADIUS-authenticated users
1. Create a remote access policy as follows:
a) Assign the policy’s VSA (attribute 26) the SofaWare vendor code (6983).
b) For each permission you want to grant, configure the relevant attribute of
the VSA with the desired value, as described in the following table.
For example, to assign the user VPN access permissions, set attribute number 2 to
“true”.
2. Assign the policy to the desired user or user group.
For detailed instructions and examples, refer to the "Configuring the RADIUS Vendor-
Specific Attribute" white paper.