User Manual Part 2

Viewing IKE Traces for VPN Connections
634 Check Point Safe@Office User Guide
Viewing IKE Traces for VPN Connections
If you are experiencing VPN connection problems, you can save a trace of IKE (Internet
Key Exchange) negotiations to a file, and then use the free IKE View tool to view the file.
The IKE View tool is available for the Windows platform.
Note: Before viewing IKE traces, it is recommended to do the following:
• The Safe@Office appliance stores traces for all recent IKE
negotiations. If you want to view only new IKE trace data, clear all IKE
trace data currently stored on the Safe@Office appliance.
• Close all existing VPN tunnels except for the problematic tunnel, so as
to make it easier to locate the problematic tunnel's IKE negotiation
trace in the exported file.
To clear all currently-stored IKE traces
1. Click Reports in the main menu, and click the Tunnels tab.
The VPN Tunnels page appears with a table of open tunnels to VPN sites.
2. Click Clear IKE Trace.
All IKE trace data currently stored on the Safe@Office appliance is cleared.
To view the IKE trace for a connection
1. Establish a VPN tunnel to the VPN site with which you are experiencing
connection problems.
For information on when and how VPN tunnels are established, see Viewing VPN
Tunnels on page 631.
2. Click Reports in the main menu, and click the Tunnels tab.
The VPN Tunnels page appears with a table of open tunnels to VPN sites.
3. Click Save IKE Trace.
A standard File Download dialog box appears.
4. Click Save.