User Manual Part 2

Using VStream Antispam
492 Check Point Safe@Office User Guide
Default Antispam Policy
The VStream Antispam default policy includes the following rules:
• All incoming SMTP connections are scanned, unless they originate from VPN.
This protects mail servers in your network.
• All outgoing POP3 connections are scanned. This protects mail clients in your
network.
You can easily override the default antispam policy, for example to exclude certain
addresses or networks from spam scanning, by creating user-defined rules. For further
information, see Configuring the VStream Antispam Policy on page 510.
Enabling/Disabling VStream Antispam
You must enable at least one VStream Antispam engine in order for VStream Antispam to
work. Once you have enabled the desired engines, you must configure them, using the
relevant sections in this guide.
To enable/disable VStream Antispam
1. Click Antispam in the main menu, and click the Antispam tab.