User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Logging in to the Safe@Office Portal
74 Check Point Safe@Office User Guide
Logging in to the Safe@Office Portal
Note: By default, HTTP and HTTPS access to the Safe@Office Portal is not allowed
from the WLAN, unless you do one of the following:
• Configure a specific firewall rule to allow access from the WLAN. See
Using Rules on page 360.
Or
• Enable HTTPS access from the Internet. See Configuring HTTPS on
page 691.
To log in to the Safe@Office Portal
1. Do one of the following:
• Browse to http://my.firewall.
Or
• To log in through HTTPS (locally or remotely), follow the procedure
Accessing the Safe@Office Portal Remotely on page 77.