User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Initial Login to the Safe@Office Portal
Chapter 4: Getting Started 73
The Safe@Office Setup Wizard opens, with the Welcome page displayed.
4. Configure your Internet connection using one of the following ways:
• Internet Wizard
The Internet Wizard is the first part of the Setup Wizard, and it takes you through
basic Internet connection setup, step by step. For information on using the
Internet Wizard, see Using the Internet Wizard on page 86.
After yo
u have completed the Internet Wizard, the Setup Wizard continues to
guide you through appliance setup. For more information, see Setting Up the
Safe@Office Appliance on page 67.
• Internet Setup
Internet Setup offers advanced setup options, such as configuri
ng t
wo Internet
connections. To use Internet Setup, click Cancel and refer to Using Internet Setup
on page 102.