User Manual Part 1

Table Of Contents
Getting to Know Your Safe@Office 500W ADSL Appliance
28 Check Point Safe@Office User Guide
Label Description
DSL An RJ-11 ADSL port used for connecting the integrated ADSL modem to an
ADSL line.
A splitter with a micro-filter is usually required when connecting this port to the
phone jack. If unsure, check with your ADSL service provider.
Before connecting this port to the line, make sure that you are using the correct
Safe@Office model for your phone line: Annex A for POTS (regular) phone lines,
and Annex B for ISDN (digital) phone lines. Your Safe@Office model's ADSL
annex type appears on the bottom of the appliance.
DMZ/
WAN2
A dedicated Ethernet port (RJ-45) used to connect a DMZ (Demilitarized Zone)
computer or network. Alternatively, can serve as a secondary WAN port or as a
VLAN trunk.
LAN 1-4 Local Area Network switch: Four Ethernet ports (RJ-45) used for connecting
computers or other network devices.
ANT1 /
ANT2
Antenna connectors, used to connect the supplied wireless antennas .
Front Panel
The Safe@Office 500W ADSL appliance includes several status LEDs that enable you to
monitor the appliance’s operation.
For an explanation of the Safe@Office 500W ADSL appliance’s status LEDs, see the
following table.
Figure 10: Safe@Office 500W ADSL Appliance Front Panel