User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Getting to Know Your Safe@Office 500 ADSL Appliance
24 Check Point Safe@Office User Guide
LED State Explanation
On (Green) Normal operation
On (Red) Error
LAN 1-4/
DMZ/WAN2
LINK/ACT Off, 100 Off
Link is down
LINK/ACT On, 100 Off
10 Mbps link established for the
corresponding port
LINK/ACT On, 100 On
100 Mbps link established for the
corresponding port
LNK/ACT Flashing
Data is being transmitted/received
DSL
Link Off
Link is down
Link Flashing
Establishing ADSL connection
Link On
ADSL connection established
DAT Off
ADSL line is idle
DAT Flashing
Data is being transmitted/received
VPN Off No VPN activity
Flashing (Green) VPN activity
On (Green) VPN tunnels established, no activity
Serial Off No Serial port activity
Flashing (Green) Serial port activity
USB Off No USB port activity