User Manual Part 1

Table Of Contents
Using Secure HotSpot
380 Check Point Safe@Office User Guide
Using Secure HotSpot
You can enable your Safe@Office appliance as a public Internet access hotspot for specific
networks. When users on those networks attempt to access the Internet, they are
automatically re-directed to the My HotSpot page http://my.hotspot.
Note: You can configure Secure HotSpot to use HTTPS. In this case, the My
HotSpot page will be https://my.hotspot.
On this page, users must read and accept the My HotSpot terms of use, and if My HotSpot
is configured to be password-protected, they must log in using their Safe@Office
username and password. The users may then access the Internet or other corporate
networks.
Users can also log out in the My HotSpot page.
Note: HotSpot users are automatically logged out after one hour of inactivity. If you
are using RADIUS authentication, you can change the Secure HotSpot session
timeout by configuring the RADIUS Session-Timeout Attribute. See Using RADIUS
Authentication on page 650.
Safe@Office Secure HotSpot is useful in any wired or wireless environment where Web-
based user authentication or terms-of-use approval is required prior to gaining access to the