User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using Rules
372 Check Point Safe@Office User Guide
Enabling/Disabling Firewall Rules
You can temporarily disable a user-defined rule.
To enable/disable a firewall rule
1. Click Security in the main menu, and click the Rules tab.
The Rules page appears.
2. Next to the desired rule, in the Enabled column, do one of the following:
• To enable the rule, click
.
The button changes to
and the rule is enabled.
• To disable the rule, click
.
The button changes to
and the rule is disabled.
Reordering Firewall Rules
To reorder firewall rules
1. Click Security in the main menu, and click the Rules tab.
The Rules page appears.
2. For each rule you want to move, click on the rule and drag it to the desired
location in the table.