User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Servers
Chapter 13: Setting Your Security Policy 359
In this
column…
Do this…
Host IP Type the IP address of the computer that will run the service (one of your
network computers), or click the corresponding This Computer button to
allow your computer to host the service.
VPN Only Select this option to allow only connections made through a VPN.
To stop the forwarding of services to a specific host
1. Click Security in the main menu, and click the Servers tab.
The Servers page appears.
2. In the desired server's row, click Clear.
The Host IP field is cleared.
3. Click Apply.