User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing the Event Log
340 Check Point Safe@Office User Guide
To view the event log
1. Click Logs in the main menu, and click the Event Log tab.
The Event Log page appears.
The log table contains the columns described in Event Log Columns on page 342. The
log me
ssages are color-coded as described in Event Log Color Coding on page 343.
2. To navigate th
e log table, do any of the following:
• To scroll through the displayed log page:
Use the scroll bars, or
Click on a log message and then press the UP and DOWN arrows on your
keyboard.
• To view the next log page, click Next.
• To view the previous log page, click Back.
3. To specify the number of logs to display per page, in the drop-down list at the
bottom of the log table, select the desired number.