User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing Network Statistics
Chapter 11: Viewing Reports 333
This field… Displays…
Errors The total number of transmitted and received packets for which an error
occurred
Dropped The total number of transmitted and received packets that the firewall
dropped
Overruns The total number of transmitted and received packets that were lost,
because they were sent or arrived more quickly that the appliance could
handle
Frame/Carrier The total number of frame alignment and carrier errors.
Frame alignment errors occur when a frame that has extra bits is received.
The number of such errors appears in the Received column.
Carrier errors occur when the carrier is not present at the start of data
transmission, or when the carrier is lost during transmission. Such errors
usually indicate a problem with the cable. The number of such errors
appears in the Transmitted column.